Thursday, September 23, 2010

Chinese Cemtery In Folsom

exploits and payloads: crack a wifi network (WPA)

Hello, I apologize for the long "silence" that has fallen on the blog. (Blame school!)
I hope you will return useful!

CAUTION AUTHOR Help (

GHEBBO_HCK

) Assumption NOT ANY RESPONSIBILITY FOR 'INAPPROPRIATE USE OF THE INFORMATION CONTAINED HEREIN.

THE GUIDE HAS A PURPOSE EXCLUSIVELY INFORMATION / EDUCATIONAL.


The first step is to Precure "BackTrack 4" (or "BackTrack3).

Now, after downloading the. ISO, burn it all and wait (but it should be?) The completion of burning.
  • (download BackTrack !)
  • done this restart your computer and insert the disk in the drive CD/DVD per far partire il "LiveCD*".

    Se il "LiveCD" non parte cambiate l'ordine delle periferiche e mettete per primo il lettore CD/DVD,poi il "LiveCD"
  • dovrebbe partire... Partito il LiveCD selezionate l'opzione più adatta alle vostre esigenze e,appena permesso, digitate "startx**" per
far partire l'interfaccia grafica di BackTrack.
Se necessario e se richiesto inserite i seguenti dati di LOGIN:
USERNAME:root

PASSWORD:toor

*LiveCD:Un CD/DVD che contiente un SO*** eseguibile,senza aver bisogno any installation.
** startx: Command to start the graphical interface.
*** SO: Operating System


Once booted the LiveCD should open a konsole, to do this press ALT + F2 and type "konsole", or click the icon.
Open the konsole should start the "monitor mode *" then type:

airmon-ng

should uscirvi Then a list of all available devices, type:
airmon-ng start name> \u0026lt;interface-type>


Obviously instead of name> \u0026lt;interface-type> you have to put the interface name of your choice
.

airmon-ng is an application that manages the interfaces.
start is the command.

interface I think you understand.
* Monitor Mode: E 'mode for the card (and a few rude words) is used to enable the injection. The next step is to make a "scan" before this, however, try to get as close as possible to the Access Point*. Per farla utilizzeremo "airodump":un'applicazione che serve proprio a "cercare" reti. (e a molto altro come vedrete presto!).



*Access Point:E' il punto di accesso della connessione...in poche (e rozze) parole il "ROUTER"

Digitate:
airodump-ng <nome interfaccia>  




e dovrebbe uscire una thing:



CH 7] [BAT 3 hour 30 mins] [Elapsed: 0 s] [09/11/2010 21:44
BSSID ; PWR Beacons # Data # / s CH MB ENC ESSID CHIHPER AUTH

ab: cd: ef : gh: on: 1 -30 mn 0 0 11 54 WPA WPA OPN crackme
now wait to see your connection and press CTRL + C (the escape character).
Now copy the BSSID of your connection (such as the "station" of your connection) and type:
airodump-ng-w \u0026lt;filename> C-\u0026lt;channel> - bssid \u0026lt;incolliamo the BSSID> name> \u0026lt;interface-type>


Before continuing, however, I will explain what we did:
airodump-ng is the application to "search for" networks and capture packets.
name> \u0026lt;interface-type> where is the interface "look" and "capture" .
Then:

airodump-ng as before.
\u0026lt;filename> is the option-w airodump used to save the captured packets on the specified file (\u0026lt;filename>).
\u0026lt;channel>-c option is used to indicate airodump on some channel "try / catch".
- bssid \u0026lt;bssid> used to indicate from which connection to capture packets.
name> \u0026lt;interface-type> as before.

Well, now we are capturing the packets ... Offi ... so we end up no more: speed things up! =) To speed things up we need a "traffic generation", ie an application that allows you to generate traffic (MA VA ??!), aireplay-ng is for ours!
Then open a new konsole and type:
aireplay-ng -9 name> \u0026lt;interface-type>
This command is used to test the card is suitable all'injection.
Then:


\u0026lt;number> aireplay-ng -0-a-c \u0026lt;Station Point> \u0026lt;BSSID Access Access Point> name> \u0026lt;interface-type>
Now we have to wait until the first screen (the one with "airodump-ng" running the scanzione) appears the word "Handshake *" in the upper right.
Once again I will explain what we did:


aireplay-ng is the application.

-9 is why we need to do a "test" on the network, which allows us to test whether it is vulnerable or not.



Then:

aireplay-ng is the application.
-0 \u0026lt;number> are the numbers of "attempt" to try to er di ricevere l' "Handshake*". -a <BSSID dell'Access Point> è semplicemente il "bersaglio". -c <Station dell'Access Point> è una sorta di specifica.
<nome interfaccia> è l'interfaccia da usare.

*Handshake:stretta di mano(simbolica) tra il computer e il router. 



Ora,via al crack!



aircrack-ng <filename>*.cap



e vi dovrebbe uscire una lista di opzioni,noi utilizzeremo le seguenti:


aircrack-ng -c <filename>*.cap -w <percorso file dizionario*>.lst



Dove: 


aircrack-ng è l'applicazione.

-c <filename>*.cap to specify the file.
-w file \u0026lt;path dizionario*>. Lst is the dictionary file *.

* File Dictionary ( or wordlist): a file containing words that the program will test "as a password until it finds the correct one.
Now wait until the program finds the password. should look something like this:

KEY FOUND: "computer" .

ATTENZIONE!NON SEMPRE LA WORDLIST CONTIENE LA PASSWORD.E' CONSIGLIATO INFATTI DI PROVARE VARIE WORDLIST.

Spero che la guida sia stata soddisfacente =)!
E,mi raccomando,se ho sbagliato qualche cosa vi prego di segnalarmelo,provvederò subito!

 

 

Saturday, September 11, 2010

List Of Animals With Eye Shine

SAFETY: crack a wifi network (WEP)



Ecco una piccola guida su come crackare reti wireless con cifratura WEP.

Non mi resta che augurarvi buona lettura =). ATTENZIONE!L'AUTORE DELLA GUIDA(
GHEBBO_HCK ) NON SI ASSUNE NESSUNA RESPONSABILITA' DELL'USO INAPPROPRIATO DELLE INFORMAZIONI QUI CONTENUTE. LA GUIDA HA UNO SCOPO ESCUSIVAMENTE INFORMATIVO/DIDATTICO.
In questo articolo illustrerò come crackare reti wireless protette da una cifratura "WEP". Il primo passo consiste nel precurarsi "BackTrack4" (o anche "BackTrack3).
Now, after downloading the. ISO, burn it all and wait (but it should be?) The completion of burning.
(download
BackTrack

!)
done this restart your computer and insert the disc into your CD / DVD to start the "LiveCD *".

If the "LiveCD" is not part of peroferiche change the order and put the first CD / DVD, then the "LiveCD"
should start ...

Party LiveCD choose the option that best suits your needs and as soon as possible, enter "** startx" to start
interface grafica di BackTrack.
Se necessario e se richiesto inserite i seguenti dati di LOGIN:
USERNAME:root
PASSWORD:toor

*LiveCD:Un CD/DVD che contiente un SO*** eseguibile,senza aver bisogno di alcuna installazione.
**StartX:Comando per far partire l'interfaccia grafica.
***SO:Sistema Operativo Ora clickate sull'icona della konsole o premete ALT+F2 e digitate "konsole".
Per poter effettuare con successo il "crack" della rete abbiamo bisogno di far partire la "monitor mode*" quindi digitate:
airmon-ng


And you should compare all the available devices. Now type:
Obviously instead of name> \u0026lt;interface-type> you put the name of your interface.
But what have we done?
airmon-ng is an application that manages the interfaces.
start is the command.

* Monitor Mode: E 'mode della scheda che (in poche e rozze parole) serve ad abilitare l'injection. Ecco finalmente un po di "azione" =). Digitate il comando:
airodump-ng <nome interfaccia>
e dovrebbe uscire una cosa del genere:


CH 7 ][BAT 3 hour 30 mins ][Elapsed: 0 s][2010-09-11 21:44
BSSID            PWR  Beacons   #Data   # / S CH MB ENC ESSID CHIHPER AUTH ab: cd: ef: gh: il: 1 -30 mn 0 0 11 54 WEP WEP        OPN  CrackMe
Ora aspettate di vedere la vostra connessione e premete CTRL+C(carattere di escape).
Copiato il BSSID della rete che vogliamo attaccare digitiamo:
airodump-ng -w <filename> -c <channel> --bssid <incolliamo il BSSID> <nome interfaccia>

Prima di continuare vi spiegherò (ancora una volta) cosa abbiamo fatto:
airodump-ng è l'applicazione per "cercare" networks and capture packets.

name> \u0026lt;interface-type> where is the interface "look" and "capture" .
Then:


airodump-ng as before.
\u0026lt;filename>-w option is used to airodump save the captured packets on the specified file (\u0026lt;filename>).
\u0026lt;channel>-c option is used to indicate airodump on some channel "try / catch".

- bssid \u0026lt;bssid> used to indicate from which connection to capture packets.
\u0026lt;name interface> as before.


it! Now we are capturing the packets ... But there's more ...

Now "speed" things: generate traffic and speed up the receipt of packages =).
For this noble (so to say = P) purpose is aireplay-ng.

Then open a new Konsole and type:


aireplay-ng -9 name> \u0026lt;interface-type>


This command is used to test the card is suitable all'injection .

aireplay-ng -1 0 -a <bssid> <nome interfaccia>


Dove:


aireplay-ng è l'applicazione.
-1 0 indica che bisogna effettuare una deautenticazione.
-a <bssid> è il bersaglio.
<nome intefaccia> è l'interfaccia da usare.


Dovrebbe uscire una schermata che dice:

Read <numero di pacchetti>(got <numero> ARP request,<numero> ACKs)

Ora non ci resta che aspettare che:

CH 7 ][BAT 3 hour 30 mins ][Elapsed: 0 s][2010-09-11 21:44

BSSID            PWR  Beacons   #Data   #/s   CH   MB ENC CHIHPER  AUTH  ESSID

ab:cd:ef:gh:il:mn  -30       1                  0      0   11   54   WEP     WEP        OPN  CrackMe
la parte #Data arrivi a (circa) 30000 a che le ARP request e gli ACKs inizino ad aumentare in modo esponenziale
e...CRACK!!!

Digitate:


aircrack-ng <filename>*.cap

Dove:

aircrack è l'applicazione per crackare.
<filename>*.cap è il file dove,precedentemente (con airodump), abbiamo salvato 
                            i pacchetti.

Ora solo un po di pazienza e il programma dovrebbe visualizzare:

KEY FOUND![12:34:56:78]   ASCII:prova
In caso non visualizzi la parte "ASCII:prova" la password è quella tra le parentesi quadre,ovviamente, senza i ':'.
Spero che la guida sia stata soddisfacente =)!

E,mi raccomando,se ho sbagliato qualche cosa vi prego di segnalarmelo,provvederò subito!

Thursday, September 2, 2010

Imagenes De Silverado Ss

Come lasciare i commenti su questo blog


Salve ragazzi...è da un paio di tempo che postate i commenti come "ANONIMO"...

postando in questo modo non riesco a seguirvi e a riconoscervi...quindi quando postate un commento selezionate "Nome/URL" ( non necessita di registrazione ma almeno potete usare un nick )





<---Nome/URL










Grazie per l'attenzione

Black Spots In My Dog's Fur

Volete fare anche voi delle video-guide? Ecco come!



Salve ragazzi, è da poco che mi sono cimentato nel mondo delle video-guide. Ho deciso farvi capire how and with what software you are ...

The software in question is Camtasia Studio 7 ... but now we see how with this simple video guide to enjoy full screen in HD at 720p by Zermo95

Play Root Beer Tapper

Nuovi iPod, spettacolo direi...

Hi guys, yesterday presented the new Apple iPod .. . Here they are!

iPod Shuffle




















iPod Nano


































iPod Touch























What do you think? Let me know your opinions!